Home » 10 Best Belt Disc Sanders Review

10 Best Belt Disc Sanders Review

This post may contains affiliate links. If you click and buy we may make a commission, at no additional charge to you. Please see our disclosure policy for more details.

A belt sander is a robust device that all woodworkers and DIY hobbyists can trust for their sanding needs. Depending on the construction style or the aesthetic specifics of the structure being built, either a belt sander or a disc one would come into use. Sometimes, both the tools’ functionality is needed, and a belt disc sander fulfills this.

It is used to take off small to large chunks of material fromwood or other surfaces quickly. Smoothening, finishing, and grinding are the other functions offered by this tool. To satisfy all these needs, it is equipped with a hoard of woodworking-worthy features. Some of them include a powerful electric motor, varied disc sizes, a belt with sensitive abrasive surfaces of different grit levels, and a dust port for all the sawdust.

Thus, it becomes essential to have a close look at all of the features before purchasing one that could last for an extended period and offer great functionality, along with comfortable use. These tools also come in varying sizes of the belt and disc, different speeds, and motor powers, hence fulfilling your carpentry or finishing requirements.

10 Best Belt Disc Sanders Review

Choosing the best belt disc sander would be handy for various DIY projects, including grinding, polishing, contouring, and sanding. But they primarily serve 2 tasks. The disc section of the device would be ideal for precision edge work. Whereas the belt sander would flatten faces and edges, while also smoothening curves on wooden pieces.

The brand of the sander is essential, but a buyer should not overlook other regulating factors. These could be the motor power, speed of the disc and belt, grit strength, durability, degree of portability, and lastly, the aesthetic appeal- so that it could fit into your workshop pleasantly!

In the following guide, you will find a wide range of sanders to pick from. They have belt sanders that are equally as good as their disc counterparts. Choosing the best belt disc sander was never easier!

Image Product
Bucktool 36-inch x 8-inch Sander Motor
  • Disc speed of 3450 RMP
  • Maintenance-free sanding belt
  • Angle adjustable work table
Bucktool 36-inch x 6-inch Sander Motor
  • Long-lasting sanding grit
  • Disc and belt speeds are 3450 RMP and 2165 SFMP
  • Miter gauge available on disc
Rockwell Belt/Disc Combo Sander
  • Hefty induction motor
  • Belt speed of 1700 SFMP
  • Capable of heavy-duty use
Ryobi Cordless P450-Lithium Brushless Sander
  • Battery-powered and cordless
  • Removable 3-inch x 18-inch belt
  • Maximum speed is 850 RMP
Palmgren Belt Bench Finishing Machine
  • Vertical and horizontal operation of the belt arm
  • Belt speed of 4400 SFPM
  • Front-mounted safety switch
RIKON Power Tools 50-151 Sander
  • 1-inch x 13-inch belt speed of 3270 SFPM
  • Light-duty use
  • Table tilt of 0 to 45 degrees
JET J-41002 2-Inch x 42-Inch 4-Horsepower 8-Inch Disc Sander
  • Cast iron construction
  • Deluxe quality miter gauge
  • Belt speed of 3100 SFMP
WEN-6515 Belt Sander Sanding Disc
  • Belt with 100-grit and speed of 3160 SFMP
  • 2 separate dust ports
  • Standing device with a massive metal base
POWERTEC-BD1502 Belt Disc Sander
  • 2 cast aluminum tables
  • Built-in sanding belt with the disc
  • Disc speed of 3450 RPM
Grizzly Industrial H6070 Belt-Disc Combo Sander
  • Motor speed of 3450 RPM
  • Adjustable platen
  • Machined aluminum tables

1. Bucktool BD4801 Belt Disc Sander with 3/4HP Direct-drive Motor

The Bucktool sander can polish off all the uneven edges of your woodworking projects with a professional level of subtlety. Even if you work with tough materials or large quantities of materials, it will not give in to the pressure. The gadget is easy to set up and use, thus making it a must-have for beginners.

Due to the presence of a safety switch, with a key and cover for the device when not in use, security is guaranteed. The base is constructed using sturdy cast aluminum with 2mounting holes and rubber feet, thus reducing vibration and providing stability. For best results, you must attach it to the edge of your work table.


  • Belt Does Not Need To Be Changed, Nor Adjusted
  • Driven Drum Permits Sanding Of Curved Works
  • Belt Can Be Tuned Between 0-Degree And 90-Degree Angles
  • Direct-Driven Motor Layout Increases Sanding Efficiency By 25%
  • Added Protection For Sanding Disc During Shipment
BUCKTOOL Direct Drive Bench Belt Sander, 4x36 in Belt and 8 in Disc Sander, 3/4HP Belt Sander for Woodworking, 5.0A Benchtop Belt Sander

The sanding belt can be tilted to fit the requirement of the nooks and crannies of your project. The sanding disc is covered with an adjustable work rest, which can be removed to sand curved pieces with ease.

It is recommended to attach a Y-fitting hose to the 2 dust ports to collect fine sawdust. Once attached, it acts as an independent sawdust collection system.

Top Three Features:

1. Direct Drive

The direct-drive ¾ induction HP motor can handle all types of sanding projects. Moreover, it works silently and is free of vibrations.

2. Free of Maintenance

There is no belt or gear involved. Hence there is no need to change it periodically or undergo frequent repairing instances. The sander is incredibly durable until the end of its work life.

3. Miter Gauge

Being equipped with a miter gauge, the worktable is angle-adjustable for both, the belt and the disc. The sanding belt can vertically tilt upto 90 degrees.

What We Liked
  • Simple placement of components enables an easy setup
  • Achieves high-speed quickly, without noise
  • Great amount of stability during operation
  • High-performing belt tracking mechanism

What We Didn't Like
  • Dust ports efficiency is low
  • Pressure on the belt system would twist it

2. Bucktool BD4603 Belt Disc Sander with Benchtop & Portable Base

If you are looking for a sturdy addition to your sanding equipment, then the Bucktool 6-inch sander is the solution. There is no need to secure it to the workbench, although stabilizing power tools is always recommended. The extra support provides additional safety when heavy materials are being worked with.

The sanding belt can be relieved by the quick-tension release handle. Tracking is also enabled due to the attachment of a tracking knob. The worktable is angle-adjustable, built using cast aluminum and amiter gauge, which can be used on both, the belt and disc. Even better, the manufacturer provides the gauge.


  • 2-in-1 machine with a 4-inch x 36-inch belt and 6-inch disk
  • Side aluminum table allows tilting and fixing
  • Silent but robust performance
  • Meets all the CSA standards
  • Miter gauge is provided
BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander

It is an ideal choice for people dealing with light-weighted constructions, and can also successfully work on metals. The compact size and the setup of the device make it fit easily into one corner without taking up much space.

The dust port may require some tweaking, since they may not be compatible with various hoses and vacuums. Although, hooking it up to the Bucktool Y-fitting hose provides a solution for both, fine and chunky sawdust.

Top Three Features:

1. Horizontal and Vertical Sanding

The belt can be adjusted in vertical and horizontal positions, according to the sanding task at hand. The aluminum casting side table can also be utilized on the belt and tuned between 0to 45-degrees.

2. Motor Power

The direct-drive feature of the motor makes it powerful, and it catches up speed quickly. Enough power is provided for working on small or large sanding projects. Above all, it is capable of sanding numerous materials.

3. Durability

A little additional pressure assists in greater sanding efficiency.The durable belt grits ensure that they do not need to be replaced repeatedly.

What We Liked
  • Direct drive assures low chances of component failure
  • Ideal for hobbyists and professionals
  • ¾ HP motor provides steady power
  • Quieter than most of its competitor products

What We Didn't Like
  • Disk and belt are at opposite ends
  • Dust ports are slightly misaligned

3. Rockwell Belt/Disc Combo Sander

The Rockwell belt/disc combo sander is one of the best buys for its price. This 2-in-1 mean machine has been purpose-built to eliminate all the splinters and rough edges from day-to-day projects of the modern DIY enthusiast or a traditional hobbyist.

The device couples up a belt platform's powers and a sanding table with a 6-inch disc for all your shaping and finishing requirements. The ½ HP massive induction motor of 4.5amp pumps a disc speed of 3450 RMP and a maximum belt speed of 1700 SFM.

The 0 to 45-degrees miter gauge and the cast aluminum disc table allows you to have tons of shaping options needed for standard techniques like contours, curves, and arcs.


  • Heavy Induction Motor Of 4.5 Amp
  • ½ HP Sander Has A Tension Belt Level For Easy Alterations
  • Safety Switch Included For Off-Time
  • Maximum Speed Of Sanding Belt Is 1700 SMP
  • Platform And Edges Are Adjustable
Rockwell Belt/Disc Combo Sander

You can hook up a shop vacuum to the dust port so that the debris can be cleared from the air, providing you with the ease of visibility and breathability. The steady metal base of the 42lbs device keeps it from wobbling, while also reducing the vibrations.

Even though it is heavy and sturdy, it will not take up much of your workbench. Additionally, the sander comes with a 2-year warranty, which is longer than most of its direct competitors.

Top Three Features:

1. Flexible Sanding

The 4-inch x 36-inch belt platform is spacious, and it can raise and lower to any angle between 0 and 90-degrees to accommodate your project's build and size.

2. Simple Belt Changes

The quick-release tension lever included in the device will enable you to change the sandpaper grits according to your work-piece.

3. Bevel Edges

The sanding table can be adjusted between 0 to 45-degrees for smoothing out beveled edges along with the belt platform, thus giving you the best handmade picture frames in the business, if at all.

What We Liked
  • Sturdy and well-built device body
  • Tracking easily adjustable with one knob
  • Excellent for small projects
  • Changing belts is extremely straightforward

What We Didn't Like
  • Not suitable for large-scale projects
  • Speed of the motor cannot be adjusted

4. Ryobi Cordless P450 One+ Lithium-Ion Brushless Sander

Ryobi released this sander as a part of its ONE+ system containing 175 cordless tools. The brushless motor technology promises a longer runtime, more power, and greater battery life. It can be paired with lithium+ HP batteries for obtaining its maximum runtime, torque, speed, and strength.

This sander has a low-profile design and a tool-free 5-position pommel handle so that it can get into tight places while providing a much more customizable and comfortable user experience. Additional factors include a tool-free belt-tracking knob and a lock-on switch to optimize user control and convenience.


  • Pommel handle can adjust to 5 different positions
  • Grip zone over-mold with microtexture for maximum grip
  • Tool-free belt tracking optimizes user convenience and control
  • Lock-on switch reduces device fatigue
  • Weighs 5.79 pounds
RYOBI P450 One+ 18V Lithium Ion 3 x 18 inch Brushless Belt Sander w/ Dust Bag and Included Sanding Pad (Battery Not Included, Tool Only)

The handle is covered in a rubber molding that improves grip and gives you comfort throughout the extended use. The motor is mounted on the front so that the device's weight can be evenly distributed. It can remove up to 325 grams of material per charge of the battery.

The sanding belt tends to slide off, so be sure to clamp it down before use. Since a normal battery's power would be used quickly, it is recommended to use the 18 volt and 6-amp hour batteries available with RYOBI, or simple 29ah batteries. These can make the device a bit heavier than required, but they definitely make it last longer.

Top Three Features:


The 18V ONE+ is a cordless system that delivers more than expected. The product is compact and loaded with essential features, making it a deserving candidate for the best belt disc sander in the market.

2. Motor's Features

Brushless motors offer 50% longer run time and extended tool life. It provides the same performance as a corded belt disc sander, with the convenience of a cordless device.

3. Dust Ports

​The dust ports can be hooked up with a wet or dry vacuum hose for dust collection. The manufacturer includes a reusable dust bag.

What We Liked
  • Cordless battery feature makes it a portable device
  • Ideal for small projects that consume less time
  • Compatible with all batteries and devices of the same manufacturer
  • Better sandpaper grit can be purchased at lower prices

What We Didn't Like
  • Loud working mechanism

5. Palmgren Belt Bench Finishing Machine

Looking for a sander that works well with metal and wood? The Palmgren belt bench finishing machine is a combination of belt and disc sanders ideal for general purpose sanding and finishing on most metals, wood, plastics, and other materials.

The durable construction of this best belt disc sander gives it a longer work life with consistency performance. A capacitor motor provides the much-needed current during the start-up and running under the load. It allows the unit to work overload without slowing or bogging down. This quality tool supports finished parts and the operator's safety too.


  • 6-inch PSA abrasive disc with a speed of 3500 RMP
  • 2-inch x 42-inch belt with a speed of 4400 SFMP
  • Performs surfacing, sanding, finishing, grinding, polishing, and deburring
  • Heavy-duty construction delivers a long life
  • Additional safety features
PALMGREN 9681061-2' x 42' Belt, 6' Disc Combination Finishing Machine 1/3 HP

A miter and table gauge is included to bring accuracy to your bevel and sanding tasks. The disc table is slotted to accept the standard gauge. Both the sanding belt and disc come with a tilting table.

Simple belt tensioning and easy belt changes are allowed by the full belt guard. If you are using this sander for knives, be careful while working your blades' spine, or the grinding may eat up the metal. Some modifications to the speed of the belt will be needed.

Top Three Features:

1. Belt Arm Adjustment

The arm can be oriented horizontally and be used near the bottom wheel to chew off substantial material from surfaces. With a twist of the Allen wrench, it can stand vertically and be used as a platen.

2. Direct Drive

The belt's rotation is powered by a direct drive, over a secondary drive belt. This ensures more power for its robust working.

3. Knife- Making Beginners

Metal-grinding is achieved easily, and it can also shape your scales, bolsters, and guards. This product is better and cheaper than grinders meant solely for metals.

What We Liked
  • Extra pressure does not slow the belt
  • Horizontal tipping of the belt enables the use of bottom wheels as concave bevels
  • 10X faster than hand filing
  • Significantly cheaper than its competitors

What We Didn't Like
  • Platen is not flat, effecting flat bevelling
  • Belt speed is too fast for some knife-makers

6. RIKON Power Tools 50-151 Belt Disc Sander

DIY enthusiasts don't necessarily always work with wood. Materials like metal, ceramics, and plastics are also needed for specific projects. The RIKON sander is the perfect tool of choice if you are looking to expand beyond finishing off generic wood-related projects.

The RIKON sander has a unique design, functioning vertically instead ofhorizontally, that most sanders are usually equipped with. The belt sanding surface measures around 1-inch x 30-inches, while the disc is 5 inches. The unit is very stable and does not rattle too much. There are directions provided so that you can secure it to the table for cleaner outputs.


  • Rubber feet with the excellence of a sturdy-build
  • Can easily tilt up to 45 degrees
  • 2-inch dust port for quick dust collection
  • Belt tracking with an easy-to-use knob
  • Weighs 18 pounds
RIKON Power Tools 50-151 Belt with 5' Disc Sander, 1' x 30', Blue

The belt and circular sandpapers are easy to replace since there is no dis-assembly required for the same. It requires minimal set up before use, as the sanding disc and belt are already installed. The dust collection system would need you to switch the vacuum hose between the belt and disc collection ports.

If one of your main factors for purchase are looks, this sander may fall low on your list. It looks conventionally different and isn’t the best choice if you’re looking for something highly portable. But its power, efficiency, build quality, and tiltable design make it a worthy buy.

Top Three Features:

1. Motor Strength

The 0.33 horsepower induction motor provides plenty of power for sanding in one go, and since it is a brushless motor it would last for long. It also offers the option of variable speed control on the grinder.

2. Robust Support

Sturdy cast material makes up the frame and base. Sealed ball bearings with vast support are used all over the device, with carbon ABS wheels for belt support.

3. Adjustable

The aluminum alloy used for the support table makes it easy to adjust as per task requirements. The worktable can also change between 0 to 45-degrees with large knocking handles for the sanding handles.

What We Liked
  • Plenty of power due to the induction motor
  • Easy to setup
  • Metal frame tracks perfectly
  • Relatively quiet- no hearing protection needed
  • Comfortable for sanding diverse materials

What We Didn't Like
  • Platen can get bent
  • Changing belts is time-consuming

7. JET J-41002 2-Inch x 42-Inch 4-Horsepower Belt Disc Sander

Two professional-grade machines come wrapped as one with the JET bench belt and disc sander. It will grind whatever you like without breaking a sweat. The device does not take up much space like a floor sander would, although it does need to sit on the edge of your work table.

The belts can also be swapped for 1-inch types, which can do a much better job than larger belts. The tracking, spring-loaded lever, and belt tensioning are effortless and stable once set. The entire contraception is built like a tank, and its powerful motor can remove material at great speed. Remember, for people looking for a piece of multi-purpose sanding equipment, this could be the best belt disc sander.


  • Tilted table with a hinged idler wheel cover
  • Handles odd shapes, angles, and small openings
  • Dust chute and dust deflector are adjustable
  • Deluxe miter gauge can twist and lock for standard angles
  • Detachable platen
JET 2' x 42' Belt and 8' Disc Sander, 3/4 HP, 1Ph 115V (Model J-41002)

For its given price, it is a much better option over its competitors. Entry-level knife makers would find it simple to work with and maneuver this product. The JET red assurance that promises a 2-year guarantee and the tech support offered, gives it the stamp of a quality JET product.

Bonus: Looking for a cordless rotary hammer drill? Check out the DIYers favorite, Dewalt (DCH273B) 20V Cordless Rotary Hammer Drill Review!

Top Three Features:

1. Durable Build

The heavy-duty steel base and rubber feet keep the sander stable and reduce any vibrations. The cast-iron structure allows sanding, grinding, and finishing whatever material you use.

2. Belt Unit

The abrasive belt unit eliminates and finishes the material at the same time. It can work as a jigsaw, a coping saw, or a hand filer.

3. Customizable

Platen is removable for smaller and complex projects. An optional flex shaft can be mounted for carving, drum sanding, and deburring, while the dust ports can be adjusted as needed.

What We Liked
  • Good choice for standard knife-makers
  • 2-inch belt allows easy access into tighter sanding spots than larger belts
  • Simple instruction module with excellent customer support
  • Motor is steering and very quiet

What We Didn't Like
  • Plastic parts can quickly get heated

8. WEN-6515 Belt 5-inch Disc Sander

Working with small, delicate pieces of wood or metal? It would be challenging to reach those tiny spots, curves, and edges by using a regular or large sanding device. But the WEN-6515 Belt 5-inch Disc Sander can reach and finish of such parts with ease.

Firstly, the sanding disc deburrs, smooths, and sands all the jagged parts and fragments of your woodwork. Secondly, the metal plate behind the belt will let you sharpen chisels, knives, scissors, and other hand tools. Thirdly, the deck can be removed or kept covered since it is easy to perform free-hand sanding with this product.


  • Strong heavy-duty base with mounting holes
  • Comes with a miter gauge, 80-grit, and 100-grit sanding disc and belt
  • 2.3 amp motor does not bog down under pressure
  • Metal Backing plate provides extended sander functionality
  • Maximum vacuuming efficiency with 2different sanding ports

The disc is ideal for fitting the parts with precision, although it needs to be set up correctly, just like any other best belt disc sander would require. Using a square to get the proper 90-degree angle is recommended. The motor's powerful speed, along with the 5-inch sanding disc, would allow you to sand whatever required.

Both the belt and disc are accompanied by a sturdy bevelling table, giving reliable support for your projects. The 2dust ports and the durable dust chute arrangement allow for a well-organized vacuum system.

Top Three Features:

1. Metal Backing Plate

The built features a metal backing plate attached 2 or 3 inches behind the belt. This apparatus will allow you to create a convex edge, a hollow one, or any other type required.

2. Easy Setup

Instructions, coupled with the pictures, make the assembly of this product much more manageable. The parts are not complicated to assemble, and many of the smaller pieces are replaceable for cheap.

3. Compact Design

Designed for both home and industrial use, it can be easily transported and stored without taking up too much space. The base can be mounted into the bench for added stability.

What We Liked
  • Lightweight and convenient usability
  • Sturdy and robust miter gauge system
  • Easily adjustable belts
  • Good built quality and excellent warranty provided

What We Didn't Like
  • Adhesive back discs need to be separated
  • Not intended for mass stock removal

9. POWERTEC-BD1502 Belt Disc Sander

The POWERTEC-BD1502 Belt Disc Sander has an industrial-strength belt and disc combination. It flaunts a 1-inch x 30-inch sanding belt and a 5-ich sanding disc. Both of them are strategically located to enable effortless adjustments. They give a wide range of functions, which include finishing curved surfaces of wood, metal, or plastic.

The belt is designed in a particular fashion, due to which you could quickly change and replace it. Even better, the track control is humanized.

Not to forget, the worktable can tilt anywhere between 0to 45-degrees according to your project's need or additional support.


  • Two-cast aluminum tables provide exceptional support
  • Precision tracking system with the abrasive belt and disc
  • Heavy-duty miter gauge, belt support, and 2dust ports
  • Suites for lightweight projects
  • Cast iron base for maximum steadiness
POWERTEC BD1502 Belt Disc Sander for Woodworking | 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc

Don't worry about keeping your workshop clean when sanding wooden materials, since the sander comes with a built-in dust collection system. This belt and disc combo sander is equipped with 21.3/4 OD dust ports that provide a neat and tidy dust collection mechanism.

Top Three Features:

1. Metal Structure

Exceptional work support is provided by the 2well-constructed aluminum tables. The base is cast with iron so that the device remains put in one place, and vibrations are minimized.

2. Design Contributions

Both, the abrasive belt and disc are big enough and perfectly sized to work with various woodworking and sanding applications. Places that are hard to reach can be sanded easily.

3. Motor Strength

The enhanced 1/3 HP and 2.3amp motor delivers sufficient power to go through any small or large sanding project. It works quietly, offering 3160 FPM speed for the belt and 3450 RPM speed for the disc.

What We Liked
  • Big-capacity belt size
  • Fast-sanding disc with a powerful motor
  • Flexible disc table for adaptability
  • Aluminum cast table is long-lasting

What We Didn't Like
  • Motor may bog down under pressure

10. Grizzly Industrial H6070 Belt-Disc Combo Sander

You might have been lately setting into discovering your new hobby of making knives, jewelry, light wooden furniture, and other knick-knacks. There would be no need to go for the industrial-sized sanders with broad functionalities.

The cheapest way to start your sanding journey would be through the Grizzly Industrial H6070 Belt-Disc Combo Sander. It is a tiny and lightweight sander, but true to its name, boasting a lot of power, just like the grizzly bear!


  • Idler roller guard and belt platen are removable
  • Contour sanding, dry sharpening, and sanding complicated projects
  • Compact and moveable
  • 1/3 HP with single phase motor at 110V
  • Sanding belt and disc can tilt till 45 degrees

The medium-power 0.33 HP motor shows praise-worthy performance for the hobby of knife-making. The 1-inch x 30-inch belt is excellent for contour and precision sanding. Its dry-sharpening feature would explain why metalworkers love it.

Top Three Features:

1. Compact Model

The device looks bulky, but it is one of the lightest belts and disc sanding machines available. The weight and space-conscious built rewards it with the title of the best belt disc sander.

2. Belt and Disc Versatility

A tilt of 45 degrees is offered by the sanding belt and disc so that it can be compatible with a wide range of small projects. These sanders can be used for both metal and wood.

3. Small & Strong

The built of this sander may be small, but the single-phase motor neutralizes its small size. It is a 1/3 HP powered tool that makes sanding straightforward and efficient, even when handling contoured wood-pieces.

What We Liked
  • Belt and disc can bevel, providing extra versatility
  • Compact and semi-portable
  • Easy contour sanding with belt platen and idler roller guard
  • Ideal for small-time hobbyists or DIY perfectionists

What We Didn't Like
  • Plastic parts easily get damaged

Buyer's Guide: What to Look for in the Best Belt Disc Sander?

Now that you have been provided with the top 10 belt disc sanders to choose from, it is imperative to know what basis your pick needs to be decided upon. Many factors should be checked off the list before you understand their implications in the product details. These include:

1. Power

The motor/power output of your sanding machine would determine its performance. The power output is measured in either amp, horsepower, or both. If their ratings are high, then a powerful sander is promised.

Higher-performance motors would eat up a lot of power as they would probably run longer and carry out thorough and uniform sanding. Most of the sanders would come with 2 to 5-amp motors, that would provide sufficient power to run both, the belt and the disc.

2. Disc Size and Speed

These sanders have the belt and disc as separate features. You will need to consider their sizes and speeds differently. The size of the disc largely depends on what is the average length of surfaces you work on. Keep in mind, a bugger disc would give you more space to work on.

The speed is measured by how many rotations the disc makes per minute, or RPM. Delicate work would require a slower disc speed.

3. Belt Size and Speed

To determine how much surface area you could work on at once, you will need to study the belt's size. Larger pieces of material would call for a larger belt.

Like the disc speed, the faster the belt moves, the more wood you can remove, polish, sand, or grind. Since there is no rotation involved, it is determined through surface feet per minute, or SFPM. A faster belt will be required if many projects or a vast surface area of wood needs to be sanded.

4. Dust Collection

Once you start working with wood and metal regularly, you would understand how important it is to clean-up after sanding. It is also crucial to be cleaning up as the sanding process is going on.

Sawdust and metal particles would make your workshop messy and also harm your lungs, in a potentially fatal way. Fortunately, most of the sanders come with a dust collection system. This is in the form of 2 dust ports comprising the entire dust collection system.

The port is used to hook up the sander with a shop vacuum. Keep in mind to check the ports' diameter so that your vacuum hose or other vacuum parts can be compatible with it.

5. Maintenance and Durability

When you purchase a power tool, some maintenance for the upkeep of the product is expected. However, it should not be too cumbersome to handle, since your project needs more focus than the tool being used for it.

Look for sanders that require changes only for their sanding belts and discs, that too rarely. Easy maintenance also includes effortless assembly and disassembly.

On the other hand, you will usually buy this product for long-term use. It should last for a substantial time, even if you utilize it for heavy sanding or grinding. A sanding machine with a robust sanding belt and high-quality built would ensure these elements are covered.

Yet need a metal saw to acquire perfectly sized parts before embarking on the sanding aspects of your project? These 10 high-end metal cutting saw reviews should be of great help.

Frequently Asked Questions (FAQs)

Can a belt sander be used for hardwood floors?

Belt sanders can be used for hardwood floors, but it would be a strenuous task. You will need a lot of time and sanding sheets of different grits and wearability, depending on the floor size and the extend of sanding you want to carry out. The job is best left to floor sanding machines.

How to change the sandpaper on the belt sander?

To change the sandpaper on the belt sander, the belt tension lever needs to be pulled till it is slack. Remove the old sandpaper, and align the new one with your sander. Slide the belt onto the tool and then align the wheels so that it fits snuggly. Finally, re-tension the belt.

What makes the belt on the sander to break?

If the belts on the sander are not turning in the correct direction, they can tear/break. Old sanders and the temperature of the surroundings could also be the reason behind its breakage. Over-use or poor-quality replacements would tear the belt easily, thus invest in a well-researched sander.


Be it home-use or industrial, there are many belt disc sanders that would provide eye-catching sanding for your products. Choosing the best belt disc sander from the above list has been made easy by listing out key features, upsides, and downsides of each of the 10 products.

The buying guide and FAQs should solve generic questions you may come up with while browsing your final selection. Don't forget to take property safety measures before you start working with the sander of your choice!

Now that you’ve ordered the best belt disc sander, how about choosing one of these portable shooting benches to sand?

Need some tool storage hacks? Don’t want to struggle to look for each tool individually? These 15 clever DIY tool storage techniques will leave you surprised.